3M Quick Connection System 2810A or 2810B Toolless module
The Quick Connect System 2810 is the latest insulation displacement connector termination system, the factory that invented the IDC more than 20 years ago. The QCS 2810 is a simple-to-use, tool-less copper block; an ideal solution for outside plant applications. Whether in cross-connect cabinets or at the edge of the network, the gel-filled, Cat. 5e compliant 2810 system is the solution.
Tool-less jumpering Simple termination practices increases technician productivity Gelled interconnect High integrity connection for network reliability & broadband performance Visibility to jumpers Ability to inspect jumper termination allows validation of connection, minimizing rework Category5e performance Reliable high-speed data transmission exceeding VDSL2 frequencies Pair-at-onctermination Increases craft productivity Low termination force Craft-friendly, tool-less design.
Dimensions: Height Width Depth*
10-pair strip (not on frame) 20 mm / 0.79” 135 mm / 5.31" 26 mm / 1.02"
Wire range IDC contacts – solid copper conductor： 0.4 mm to 0.6 mm 26 AWG to 22 AWG
Wire re-terminations: 250 re-terminations of 24 AWG per Telcordia TR-NWT-001195
Insulation resistance: >1x1010 Ω
Contact resistance: < 10 mΩ
Dielectric strength: 3000 V rms, 60 Hz AC
High voltage surge: 3000 V DC Surge
EIA/TIA 568B.2 Category 5e component compliant
Telcordia TR-NWT-001195 “In process” “Generic Requirements for Insulation Displacement Connector (IDC)
Cross-Connect Terminal Blocks”
Operating temperature range -20°C to 60°C
Storage temperature range -40°C to 90°C
RoHS: Compliant with EU RoHS Directive (2005/95/EC)
Contacts: Bronze, Tin (Sn) plating