10 pair LSA profile NT disconnection and connection module
Two models are available:
LSA-PROFIL NT 8 /10 Pairs for installation in PROFIL 95 frames (VTS,digital signal distributor or Bw7R frames) or installation on mounting frame NT.
The LSA NT module proofs to be the most flexible model. The spaces can be varied as required. Given to the wire routing plate used, the installation grid is 17,5 mm when one wire routing plate is omitted or one is used for 4 pairs on the right and another one for 4 pairs on the left. If all 8 pairs are
patched to one side then an installation grid of 19 mm is the result. It is possible to stack the routing plates if a crossed installaton of the patch wires is necessary. In this case the grid gets larger by 8 mm with every plate.
On the backside of the plate a cable take up is assembled. It is earthed via an inbuilt earthing clip and connects all s-contacts. A contact to the cable shield can be established with the use of various cable clamps which are the same as in the model range 2/8 x abs.
The module can be snapped on to the NT holder. The holder defines a space-saving mounting grid of 17,5mm. This module is used alternatively in collocation distributors. Either no wire routing plates are used or only the type 4R/4L.Shielding and strain relief is executed at the respective holder.