10 pair Tyco C5C Termination Magazine blocks
The C5C Termination blocks is the latest addition of digital transmission quality connectors. It is a further development of the very popular product of IDC magazines like such as the UCS and the QDF. It is a classic example of design and applied technology for achieving:
• Low attenuation
• High insulation resistance
• High SNR (Signal to Noise Ratio)
• Maximum bit-rate throughput up to CAT5 requirements.
It saves space due to its small footprint, mounts on high density mounting brackets, with a vertical pitch of 17.5 mm., or a low density bracket, with a vertical pitch of 22.5 mm. Magazine removal from high and low density mounting bracket is effected by hand without the need of a tool.
Thermoplastic UL 94 rated V0 (self extinguishing), oxygen index 29.5.
High strength special brass alloy with anti-corrosion coating.
High strength phosphor bronze with anti-corrosion coating.
Solid wire: 0.35 mm to 0.64 mm (28 to 22 AWG)
Contact resistance (ASTM B539-96) < 1 mΩ
Category 5 as per EN 50173 & EIA/TIA 568-A 1995 (ANSI)
Dielectric Strength (IEC 512-2 Test 4a Method A) 2000 Vrms for 5 min.
Insulation Resistance (IEC 512-2 Test 3a Method A) > 1012Ω
Gel Filled Version
Salt fog (IEC 68-2-11 Test Ka) > 108Ω
(7 days in 3 % NaCl solution)