How to Install 110 Wire Block
1.Mount the 110 wiring block and legs
onto a suitable mounting surface with
the necessary screws and hardware.
2.Remove the 110 wiring block from
the legs by depressing the outer 4
fanning strips. Pull the 110 wiring
block away from the legs.
3.With the 110 block removed, route
the cable between the legs.
4.Lace the cables through the appropriate
openings in the 110 wiring base and snap
the 110 wiring block back onto the legs.
Push the wiring base onto the legs until
the latches “snap” into place.