Krone LSA-plus Insertion Tool solutions

- Sep 21, 2017-

How does the LSA-PLUS Insertion Tool with Sensor work?

    With the LSA-PLUS Insertion Tool S, the wire can be trimmed and connected in a gas-tight connection in a single action. There is no need to strip the wire or use screws. Simply applying pressure once with the tool is enough. A correctly terminated contact is indicated by an audible click.

How is the sensor used? 

The sensor detects whether the wire has been pressed far enough into the contact. The cutting mechanism that trims the excess wire ends is not activated until the contact is correct. 

How is the scissors inhibitor used?

    In cases where you do not want to trim the residual wire end, for example, when several neighbouring contacts are to be bridged, the inhibitor clip is positioned horizontally. Now, the wire can be fed loosely into the corresponding contact row and then connected using the LSA-PLUS Insertion Tool S. This means you can create circuits whenever you need to, without having to search for a suitable bridge. 

How are the hooks used?

    With the hook, you can remove connected wires from the contact, or 1-pair ComProtect® plugs from the module. The hook is also suitable for replacing the arrestors in the magazine. How is the blade used? The blade is used to release Sereis 2 modules from the backmount frame;